1. Car & Truck Engines Used/New Products
  2. sku: 3184682399914611
  3. FORD 300-9342

FORD 300-9342 Engine 4.2L 81K

fits model: F150. make: Ford. year: 2005–2008.

300-9342 Ford F150 4.2l Engine 2005 2006 2007 2008 81k Miles

( Manufacturer Part Number: 300-9342 ), ( Non-domestic Product: No ), ( Fuel Type: Gasoline ), ( Type: Vin ), ( Manufacturer Warranty: Yes ), ( Engine Size: 4.2l ), ( Number Of Valves: 12 ), ( Country/region Of Manufacture: United States )

Review FORD 4.2l Engine 81k Miles fits F150 2005–2008

The Ford 300-9342 engine is a 2.0L Duratec inline-4 cylinder engine that was produced by Ford Motor Company for select Ford F-150 models from the 2005 to 2008 model years. This engine is part of the Duratec series, which is known for its durability, efficiency, and performance.

This engine is characterized by its aluminum cylinder block and aluminum heads, which help to reduce weight and improve heat dissipation. It has a displacement of 2.0 liters and a bore x stroke measurement of 3.58 inches x 3.54 inches (90.9 mm x 90.0 mm). The engine has a compression ratio of 9.8:1 and a total of 4 valves per cylinder, involving double overhead camshaft (DOHC) design.

The Ford 303-9342 engine produces a maximum power output of 136 horsepower at 6,400 rpm and a maximum torque of 144 lb-ft at 4,750 rpm. These figures might vary slightly depending on the specific model year and other factors.

Some of the key features of this engine include an overhead camshaft design, roller-finger-type timing chains, a cast-iron crankshaft, and a forged-steel connecting rods. The engine also incorporates a balancer shaft to help reduce engine vibration and improve smoothness.

This engine is mated to a 5-speed manual or 6-speed automatic transmission, depending on the specific model year and configuration. It incorporates several advanced technologies, including electronic fuel injection and a maintenance-free ignition system, for enhanced fuel efficiency and reliability.

This particular engine has been serviced and has a known service history of approximately 81,000 miles. Having reached this mileage, routine maintenance is important to ensure optimum performance and longevity. Regularly check the engine oil and oil filter for cleanliness and change it as needed, change the air filter and cabin filter, and consider replacing the fuel filter every 30,000 to 50,000 miles. Additionally, inspect the coolant, power steering and brake fluids regularly, and keep the fuel system clean to ensure the engine continues to run efficiently and effectively.

It's also important to note that this engine is an aftermarket or remanufactured engine, which may not be the exact original engine that came in your 2005-2008 F-150 truck. However, the engine is thoroughly tested and comes with a warranty, giving you the peace of mind that it will perform reliably and effectively.

In summary, the Ford 300-9342 engine is a robust, fuel-efficient, and powerful 2.0L Duratec inline-4 cylinder engine that was used in selected Ford F-150 models from 2005 to 2008. This engine has a long list of features that contribute to its durability, such as an aluminum cylinder block and heads, camshafts, and connecting rods made of cast iron and forged steel. With a projected power output of 136 horsepower and a torque of 144 lb-ft, this engine provides ample power for most driving applications. For the engine to run at its best and reach its maximum lifespan, routine maintenance should be performed, and filters and fluids should be changed as recommended.

The Ford 3.0L Duratec V6 engine, model number 300-9342, was used in Ford F-150 pickups from 2005 to 2008. Here are some pros and cons of buying a used Ford F-150 with this engine that has around 81,000 miles:

Pros:

1. Fuel efficiency: For a V6 engine, the 3.0L Duratec delivers relatively good fuel economy compared to larger V8 engines. This can lead to cost savings on fuel.

2. Quiet and smooth: Reviews suggest that the engine runs quietly and smoothly, providing a comfortable driving experience.

3. Durability: The 3.0L Duratec engine has a reputation for being robust and reliable, especially when compared to the 4.2L inline-six engine that it replaced.

4. Power: With 203 horsepower at 5750 RPM and 216 lb-ft of torque at 4000 RPM, the engine offers sufficient power for most light-duty applications, like towing small trailers or carrying heavy payloads.

Cons:

1. Timing chain issues: There have been reports of timing chain tensioner issues, which, if not addressed timely, can lead to potential engine damage and expensive repairs.

2. Leaking valve cover gaskets: Valve cover leaks are relatively common on these engines. Look for heavy oil consumption or oil drips as signs of this issue.

3. Water pump problems: The water pump is known to fail prematurely, especially under heavy usage or severe operating conditions. Replacing a water pump can be a costly repair.

4. Exhaust manifolds: The exhaust manifolds of the 3.0L Duratec engine may crack and require replacement, which can be an costly repair.

Conclusion:

The 3.0L Duratec V6 engine, model number 300-9342, is a capable powerplant for a Ford F-150 with its decent fuel economy, smooth operation, and adequate power. However, it does come with some downsides, including known issues like potential timing chain tensioner failures, leaking valve cover gaskets, water pump problems, and possible exhaust manifold cracks.

Recommendation:

If you're considering buying a used Ford F-150 with the 3.0L Duratec V6 engine, it's highly recommended that you have a thorough inspection done by a qualified mechanic before making a purchase. Addressing any known or potential issues upfront can help minimize your long-term repair costs and prevent unexpected expenses. Additionally, always check the service history of the vehicle and consider adding an extended warranty to give yourself extra peace of mind.

Details:

90 Day Replacement Warranty. Daytime phone number is required load will not deliver until appointment scheduled. Add $80 for Lift Gate Delivery, $100 Diesel Engine Delivery. Drain excess oil and coolant from exhaust system.

Load is curbside delivery ONLY. All other parts that may be provided are Accessories and Extra Parts. Insure this engine is the same application as one being replaced. Replace water pump.

Install and replace timing belt if necessary, your engine has a chain it is set ready for installation. Inspect and replace gaskets seals front seal, rear main valve cover gaskets, oil pan. No warranty is provided for any such parts that are attached, including as switches, sensors, cables, injectors, electronics, belts including timing belt/chain, hoses, water pumps, manifolds and oil pans. Shipping Details.

Someone over 18 must be present for delivery. Exchange attached accessory items to insure proper fit mounts, intake manifold, exhaust distributor, sensors. Replace engine oil, oil filter, air fuel filters, coolant-antifreeze. Install new thermostat gasket.

Insure the cooling system is flushed and functioning properly.

part #: 3009342 price

  • $1499.00

specifications grokengines:

  • for models: F150
  • for makes: Ford
  • for years: 2005-2008
  • mpn: 300-9342
  • non-domestic product: No
  • fuel type: Gasoline
  • type: Vin
  • manufacturer warranty: Yes
  • engine size: 4.2l
  • number of valves: 12
  • country/region of manufacture: United States

returns grokengines:

  • time: 30 Days
  • paid by: Seller
  • policy: Returns Accepted

general grokengines:

  • condition: Used
  • Car Truck Parts Accessories > Engines Engine Parts > Engines

offer grokengines:

  • availability: In Stock
  • options: Ship-to-home
  • started: December 14, 2024
  • sold: 0
  • quantity: 1

shipping grokengines:

  • cost: $359.00
  • type: Fixed
  • service: Flat Rate Freight
  • class: Freight

payments grokengines:

  • other
  • wallet: Paypal
  • credit card: Discover

seller grokengines:

  • rating: 98.8%
  • # reviews: 2562
  • city: Orlando, Florida
for models: f150, for makes: ford, for years: 2005-2008, non-domestic product: no, fuel type: gasoline, type: vin, manufacturer warranty: yes, engine size: 4.2l, number of valves: 12, country/region of manufacture: united states,
category: auto parts > car truck parts accessories > engines engine parts > engines, sku: 3184682399914611,

Ford 300-9342 Is Similar To:

grokengines logo
3 offers $1499.00–$1499.00 USD
  • Offer #1: $1499.00 price + $389.00 shipping estimate = $1888.00* total. Install and replace timing belt if necessary, if your engine has a timing chain it is set and ready for installation. FORD F150 4.2L 2005 - 2008.+$389.00 shipping
  • Offer #2: $1499.00 price + $389.00 shipping estimate = $1888.00* total.+$389.00 shipping
  • Offer #3: $1499.00 price + $389.00 shipping estimate = $1888.00* total.+$389.00 shipping

Copyright © grokengines.com