1. Car & Truck Engines Used/New Products
  2. sku: 4576047930981673
  3. DODGE 300-8995A

DODGE 300-8995A Caliber Engine Motor 2.0L 145K 863916

fits make: Dodge. year: 2007.

300-8995a Dodge 2007 Caliber 2.0l Engine Motor Complete Assembly 145k 863916

( Part Type: Engine Motor ), ( Ipn: 300-8995a ), ( Fitment Type: Direct Replacement ), ( Modified Item: No ), ( Manufacturer Warranty: Unspecified Length )

Review DODGE Caliber 2.0l Engine Motor Complete Assembly 145k fits 2007

The Dodge 300 8995A Caliber engine is a 2.0-liter, inline four-cylinder powerplant that was produced by Mitsubishi Motors and installed in various Chrysler Group vehicles, including the Dodge Caliber, starting from the 2007 model year. With a displacement of 1,994 cubic centimeters, this engine delivers a balanced and efficient performance.

This particular engine, with the 8995A designation, comes with several notable features. It is equipped with Mitsubishi's Innovative Valve timing Electronic Control System (IV-VEC), which optimizes valve timing for improved engine performance and fuel efficiency. The engine also boasts a double overhead camshaft (DOHC) design, providing greater power output and responsiveness.

The Caliber engine features an aluminum engine block and cylinder head, which contribute to its lightweight and durability. It comes with a forged steel crankshaft and connecting rods for enhanced strength and reliability. The engine also includes a maintenance-free timing chain system and an aluminum intake manifold.

The 2.0-liter engine produces approximately 141 horsepower at 6,000 rpm and 138 lb-ft of torque at 4,400 rpm. It is mated to a choice of transmissions, including a five-speed manual or a four-speed automatic, depending on the specific application.

This engine was manufactured with an eye towards minimizing emissions and improving fuel economy. It features a secondary air injection system for improved combustion efficiency and reduced exhaust emissions. The engine also meets the rigorous U.S. Environmental Protection Agency (EPA) and California Air Resources Board (CARB) emission standards, ensuring that it is not only powerful but also environmentally friendly.

The Dodge 300 8995A Caliber engine has a proven track record for reliability and durability. It has been installed in thousands of vehicles and has consistently provided solid performance, making it a popular choice for those seeking a dependable and efficient powertrain.

With a service interval of 10,000 miles or 12 months, this engine is easy to maintain, ensuring that it continues to deliver impressive performance for many years to come. Its compact size and efficient design make it an excellent choice for a wide range of applications, from daily drivers to performance vehicles. Overall, the Dodge 300 8995A Caliber engine is a versatile and powerful powertrain that offers a balance of performance, efficiency, and reliability.

Buying a used Dodge Caliber 2.0L engine (Part number: 8995A, from a 2007 model with 145,000 miles) comes with several pros and cons that you should consider before making a decision.

Pros:

1. Cost-effective: Buying a used engine is generally more affordable compared to purchasing a new one. This can save you a significant amount of money, especially if the cost of a replacement new engine is high.

2. Availability: Used engines are often more readily available than new ones. You can find them from various sources, such as salvage yards, independent sellers, or even from other car owners.

3. Similar performance: A used engine from the same make and model should perform similarly to the original engine. This means you can expect similar power output and fuel efficiency.

Cons:

1. Unknown history: When buying a used engine, you may not have a complete history of its maintenance and repairs. This can lead to potential issues down the line.

2. Wear and tear: A used engine will have accumulated some wear and tear, which could lead to problems. These issues could be minor, but they could also be major and expensive to repair.

3. Compatibility: While a used engine from the same make and model should be compatible, there could still be issues with wiring harnesses, sensors, or other components that may need to be addressed.

Ending Conclusion:

Buying a used Dodge Caliber 2.0L engine (Part number: 8995A, from a 2007 model with 145,000 miles) can be a cost-effective solution for replacing a faulty engine. However, it comes with risks such as unknown history, potential wear and tear, and compatibility issues. It's essential to carefully evaluate the engine's condition, obtain as much information as possible about its history, and consider the cost of any necessary repairs before making a decision.

Recommendation:

If you decide to go with a used engine, it's highly recommended to purchase it from a reputable seller, such as a certified used parts dealer or a trusted independent seller. They can provide you with detailed information about the engine's history, condition, and any necessary repairs. Additionally, consider having the engine inspected by a professional mechanic before installation to ensure that it's in good working order.

Details:

This 2007 DODGE CALIBER 2.0L Engine Assembly 145K Miles is in overall good condition. Shipping is via USPS or UPS. Compatible with. Please also use the pictures to ensure a proper fit.

Most electronic parts are not plug and play. To aid in installation, you get to keep your current engine and all attached accessories.

part #: 300-8995a prices

  • $395.00-$699.84

specifications grokengines:

  • for makes: Dodge
  • for years: 2007
  • part type: Engine Motor
  • ipn: 300-8995a
  • fitment type: Direct Replacement
  • modified item: No
  • manufacturer warranty: Unspecified Length

general grokengines:

  • Car Truck Parts Accessories > Engines Engine Parts > Engines
  • condition: Used

seller grokengines:

  • city: Las Vegas, Nevada
  • rating: 97.9%
  • # reviews: 50393

shipping grokengines:

  • service: Flat Rate Freight
  • type: Fixed
  • class: Freight
  • cost: $0.00

payments grokengines:

  • credit card: Visa
  • other
  • wallet: Paypal

returns grokengines:

  • policy: Returns Accepted
  • paid by: Seller
  • time: 30 Days

offer grokengines:

  • availability: In Stock
  • started: April 21, 2025
  • quantity: 1
  • options: Ship-to-home
  • sold: 0
for makes: dodge, for years: 2007, part type: engine motor, fitment type: direct replacement, modified item: no, manufacturer warranty: unspecified length,
category: auto parts > car truck parts accessories > engines engine parts > engines, sku: 4576047930981673,

Dodge 863916 Is Similar To:

grokengines logo
3 offers $395.00–$699.84 USD
  • Offer #1: $649.84 price + $0.00 shipping estimate = $649.84* total. Transfer cases will not be included with transmissions from 4x4 or All Wheel Drive vehicles. Model: JEEP COMPASS.FREE SHIPPING
  • Offer #2: $699.84 price + $0.00 shipping estimate = $699.84* total. Valve (mounted to intake).FREE SHIPPING
  • Offer #3: $395.00 price + $550.00 shipping estimate = $945.00* total. This will indicate if the engine has been overheated. Model: DODGE CALIBER.+$550.00 shipping

Copyright © grokengines.com